1001-F
Single "P" Profile
White
4 x 8' lengths

Easily installed on any horizontal or vertical surface.

Large "P" section with large air volume provides excellent protection. Uses large corners, end plugs and connectors.

1004-F
Single "D" Profile
White
10 x 8' lengths

Ensures peace of mind for any runabout or personal watercraft owner. Uses small corners, end plugs and connectors. Install on any horizontal or vertical surface.

1002-F
Double "D" Profile
White
5 x 8' lengths

Provides double the protection with two air-filled channels. Uses small corners, end plugs and connectors. Easily installed horizontally or vertically on any dock or boat house. Requires 2 End Plugs or Connectors for each joint.

1210-F
Heavy Slant "P" Profile
3 x 8' lengths
White

This exceptionally strong Profile is further reinforced by two internal supports. like all DOCK EDGE + Profiles, it is constructed of marine grade flexible PVC, developed not to chip or crack under normal usage. Unaffected by oil, gas or salt water. UV and Fungus Inhibitors prevent fading, yellowing, deterioration from sunlight and unsightly blotching.

Full Face Heavy
White

Ideal for larger applications, this Profile provides extra strength and security against damage to boats or property. Double internal channels with cross girder adds additional protection from impacts and provides a large contact area.

Small "P" Profile Heavy Duty
White

Perfect for small outboards or personal watercraft. Will resiliency and brilliance for years. Can be installed in minutes.

Dock Guard Profile
White

3/4" wide x 2 7/8" high

The economy Dock Guard co-extruded Profile can be used in light to medium duty applications. It features a raised lip for gunwale protection on Ski and Bass boats.

1006-F
Mounting Screws

#10 - 1" Robertson Trus with 7/16" head diameter
Stainless Steel will prevent unsightly staining caused by rusting or regular steel fasteners. Recommended for use with all Profiles. Driver bit included.

Outside Corners
White

Connect AIR CUSHION Profiles at any outside 90 degree angle corner.

Air Cushion Connectors
White

Connect AIR CUSHION Profiles.

End Plugs
White

Seal AIR CUSHION Profile ends.

1153-F
DocKushion Small
Putty, Foam, Interlok
(1 pc/pk)
48" x 1.5" x 2.5"

1057-1-F
Corner Bumpers
White
Single (1 Pc/Pk, Scr& Hdr) WT
Screws and hardware included

Protect your vessel from damaging impact with dock corners. This air-filled bumper is constructed from nylon reinforced vinyl and features a built-in air valve for inflation or deflation if necessary.

Protect™ Bumpers
HD, PVC
White

These Heavy Duty Bumpers are manufactured from PVC with UV Inhibitors and Fungicides,have excellent shock absorption qualities and will not mark or mar the hull of your boat. The Protect™ Straight and Protect™ Corner Bumpers also have many industrial applications where cushioning and protection are required.

1005-F
Boat Saver
White
1 x 24" Pc / poly bag w/ header
24" wide x 2.5"high

Developed specifically for AIR CUSHION spot protection. It's like having a fender mounted just where you need one the most. Order several for complete protection. Can be mounted vertically or horizontally on docks, pilings or boat houses. Combine with other DOCK EDGE+ high quality Profiles for total protection. 24" long.

Post Lite

Easy twist on lid with large rubber seal
Circuit & Battery Holder with Clip
Brighter Super Bright LED

6 LED colors available. Change colors anytime!*
Patent Pending Universal Fitting
2X More powerful than garden lights! Powerful solar charging performance!
360º lenticular light Diffusing lens maximizes Light reflection
NEW Domed light reflector Enhances light output
MAKING NIGHT TIME BOATING SAFER FOR EVERYONE

Each Lite Fits Post Sizes:
• 1-5/8” (41mm) OD
• 1-7/8” (48mm) OD
• 2-3/8” (60mm) OD
• 3-1/4” (83mm) ID
• Brock Docks
• Flat Surfaces
• Also Fits New 2.00” (51mm) OD with available adaptor

96-257-F
Heavy Duty Solar Dock Light

Perfect for
• Docks
• Walkways
• Decks
• Landings
• Durable, Weatherproof
• Replacable batteries

96-255-F
DockLite
8.5x6x1

The wireless solar DockLite™ is easy to install. Its' durable, weatherproof low profile construction makes it an attractive and functional addition to Docks, Walkways, Decks and Landings. Ideal for illuminating trouble spots on pathways or transition areas such as from dock to shore. With extended duty solar charged batteries the DockLite™ will last until sunrise. Automatic on-at-dusk.

Dock Flip Up Cleats

Where safety is a concen this cleat folds down to a low profile base and conveniently flips up for easy use. All surfaces are smooth and rounded. Made from marine grade aluminum and white polyester powder coated. Use on small runaboats or Personal Watercraft.

Our cast aluminum cleats are sand blasted to give a clean grey matte finish. Each cleat is designed with an extra wide footprint for added strength. As strong and durable as they look, they will be attractive, functional additions to your dock.

Dock Flip Up Cleats

Where safety is a concen this cleat folds down to a low profile base and conveniently flips up for easy use. All surfaces are smooth and rounded. Made from marine grade aluminum and white polyester powder coated. Use on small runaboats or Personal Watercraft.

Our cast aluminum cleats are sand blasted to give a clean grey matte finish. Each cleat is designed with an extra wide footprint for added strength. As strong and durable as they look, they will be attractive, functional additions to your dock.

Dock Cleat
Open Base
Aluminum, Matte

These cast aluminum cleats are sand blasted to give a clean gray matte finish. Each cleat is designed with an extra wide footprint for added strength. As well, each cleat has an enlarged counter-sunk hole for easy installation with a socket. Can be through bolted or lag bolted. Available in two styles.

Cast Iron Dock Cleats
Galvanized

These are your traditional, Cast Iron, Hot Dipped Galvanized Dock Cleats. The mounting holes are recessed with a hexagonal shape to stop the head of a carriage bolt from turning. This eliminates the need to use tow wrenches when mounting.

Cleats

2506W-F - Flip up 6" white Almag 35
2508P-F - Classic 8 1/2" aluminum polished

Dock Cleat
Injection moulded High Density Polyethylene and U.V. Stabilized. Available in 6" & 8" sizes

2308-F

87-110-F
Galvanized Screw-In Dock Ring

• 1200 lb. Capacity (550 Kg)
• Galvanized

Ring Measures: 2” dia. x 5/16”
(5 cm x 0,79 cm)

87-109-F
Galvanized Dock Ring

• 2000 lb. Capacity (910 Kg)
• Galvanized

Ring Measures: 2” dia. x 1/4” (5 cm x 0,6 cm)

These Bright White Galvalume™ ladders will make a durable and attractive addition to your dock, seawall or any marine application. Heavy 1-1/2” tubing ensures a positive grip and Stainless Steel hardware is included.

Premium Mooring Whips

These Premium Whips start with a solid fiberglass rod and are then manufactured in multi-stages with an exclusive cross-wound fiberglass for extra rigidity unobtainable with solid rod alone. This multi-stage manufacturing gives these whips the necessary strength and flex to retain the boats’ position. Exclusive “Plug & Socket” design for quick and easy separation and cast aluminum base with built-in cleat, ring and thumb screw. Each whip includes our unique functional roller tip and a tie-off cleat for easier access to your boat. Stainless steel mounting hardware included.

53-131-F
Pontoon Fender

6 X 36
Cream

Dock Backer Plate

93-122-F

Dock Backer Plate 9/16" punch, HD, Galvanized

Dock Bottom Pad

94-102-F

Galvanized

Dock Pin

96-111-F

Heavy Duty, 3 1/4"
long 3/4" rod

Dock T Connector

99-011-F

Femail 9/16"
Squarehole HD Gal

Dock T Connector

99-012-F

Male 9/16"
Squarehole HD Gal

Base Plate

86-102-F

5.25 x 5.25 x 2.38
Galvanized

Backer Plate

87-122-F

7/16" Punch
Galvanized