Fluid Extractors, Oil Changers,
Suction Pumps, Funnels, Gear Case Fillers
Pressure and Vacuum Tester

07398
6.5 Liter Fluid Extractor

Empties oil in 15 pumps or less

Extracts warm or cold oil!

Complete kit includes: (1) three extraction tubes for fluid
withdrawal and (2) tethered cap and easy-to-use instructions.

No air or electrical power is required.

33331-10
Economy Fluid Extractor Kit

Universal self priming hand pump.

Ideal for oil, water, and other fluids

Kit includes two 38" dipstick tubes and 40" tubing, and a self priming pump.

5060
Topside Oil Changer

Clear vacuum hose and black suction probe reach down through the dipstick tube to the bottom of the engine pan.

Powerful vacuum pump action that pulls the dirty oil and sludge into the Oil Changers tank.

Use it for bailing the boat, removing transmission-oil overfill, and cleaning up spills.

5000
Air Power - Oil Changer

Makes oil changes and other boat maintenance jobs quick clean and easy.

18-52104
Oil Extractor

8.8 L (2.3 Gal)
Air operated extractor
Built-in shut-off valve to prevent overfilling comes with 5 feet flexible hose and two rigid dipstick tubes

18-52204
Oil Extractor

8.8 L (2.3 Gal)
Built-in shut-off valve to prevent overfilling comes with 5 feet flexible hose and two rigid dipstick tubes

18-9781
Quart Pump

Includes lube fitting for domestic lower units with flexible fill line

18-9786 (Standard)
18-9787 (Import)

Lower Unit Fill Tube

18-9794
Adapter

Yamaha/Nissan/Tohatsu/ Honda

18-9795

Gear Lube Adapter

03603 - 18" Flex Funnel

Made from a tough, high-density polypropylene.

A size for every need with standard funnel options from 4" to 8" in diameters as well as a 3 pack funnel assortment.

03589 - 6" Funnel

03587 - 8” Funnel

Made from a tough, high-density polypropylene.

Great for gas/oil mix 2-cycle engines need.

17850-1012

Oil Changer

The Economy Engine Oil Changer will extract up to 50 weight of oil at a temperature of 70°F (21°C) through the engine’s dip stick tube.

17800-2000

09200-0023 - Replacement Nitril Impeller

Port a Quick

Lubricating oil-change pump kit with pipes, battery clips & switch.

The new 3 gallon design filler makes it easier to fill or flush gear cases. Translucent plastic container allows you to check tank oil level. Sturdy tear-drop design resists tipping over. Includes the check valve venting system. The check valve on the vent allows you to remove the filler nozzle without loosing any appreciable amount of lubricant.
Included 551-33CV E-Z Fill® and 551-33HA (listed below).

551-33CV
Check Valve Assembly

551-33HA
Replacement Hose Assembly

551-33PA
Replacement Pump Assembly

551-33TN

Threaded Nozzle

Replaces both S34 and V34 Testers.
Combination unit does both pressure and vacuum testing in
one unit. Simply flip a valve on the side and change it from
vacuum to pressure.
Includes 551-34HA Hose Assembly,
551-334M and 551-334S adapters.
NOTE: For a repair kit, order P/N: 551-34R.

551-34G
Replacement Gauge
Replacement gauge for the
551-34PV vacuum/pressure tester.

551-334TN
Threaded Nozzle

551-33HA
Hose Assemebly

551-34R
Repair Kit

Seal repair kit for the 551-34PV vacuumn/pressure tester